Sunday, June 23, 2024
Home3D Printing3D Printing Webinar and Occasion Roundup: Could 19, 2024 -

3D Printing Webinar and Occasion Roundup: Could 19, 2024 –

This week, Stratasys continues its superior coaching and begins its Expertise Stratasys tour throughout the US. ASTM’s AMCOE continues its skilled certificates course, and SPE is providing a workshop about selecting the best plastic materials. ADDITIV Design World takes place, and Makelab will maintain a celebration celebrating the opening of its new San Francisco location! Learn on for the small print of those occasions, and plenty of others.

3D Printing Information Unpeeled

Our Govt Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), gives a information livestream one to 2 instances every week known as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Dwell and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing trade that week, and why they’re essential. A number of the tales in his roundup are ones we’ve lined at, and a few should not, however they’re all equally fascinating and impactful!

Could 20-25: SPE’s Sensible Materials Choice Workshop

In keeping with the Society of Plastics Engineers (SPE), 45% of plastic product failures are as a result of incorrect materials decisions. To keep away from the identical destiny, join SPE’s 4-part “Fundamentals of Plastic Materials Choice” workshop this week! From 11 am to 1 pm EST on Could 20, 21, 22, and 24, this digital workshop will provide help to grasp the artwork of plastic materials choice so you may make the only option in your challenge. You’ll additionally find out about options that would enhance the cost-effectiveness and efficiency of your merchandise, and develop an understanding of plastic materials habits from molten resin to end-use half efficiency. The presenter might be Eric Larson, Proprietor and Founding father of engineering consulting firm Artwork of Mass Manufacturing.

“Utilizing frequent language, we are going to translate basic phrases a couple of materials’s traits – corresponding to stiffness, power, and toughness – into particular technical properties which can be related – and quantifiable – to the meant software. We are going to evaluate trade customary checks which can be used to quantify materials properties, and talk about learn how to interpret the info and perceive the habits of the fabric to evaluate its use in an meant software.”

You may register for the workshop right here. Seats are restricted, so don’t delay!

Could 20: ASTM Skilled Certificates Course in AM

ASTM Worldwide’s AM Heart of Excellence (AMCOE) is holding its ninth Skilled Certificates Course in Additive Manufacturing. This complete providing, which ends on June 4th, consists of eight modules over a one-month interval that cowl the complete AM course of chain, offering attendees with an excellent mixture of dwell skilled Q&A classes and self-paced studying. Two modules might be lined every week, taught by consultants from academia, trade, nationwide labs, and regulatory our bodies. The modules lined in Week 3, which begins Could twentieth, are Mechanical Testing and AM Security; the dwell Q&A session with instructors might be held Could twenty eighth.

“This course will equip attendees with core technical data associated to frequent AM practices and can permit them to earn a Skilled AM Certificates that may function the inspiration and pre-requisite for incomes future specialised role-based AM certificates via the ASTM AM CoE. Attendees will full a multiple-choice examination upon course completion.”

You may register for the course right here.

Could 21 – 23: Stratasys Continues Superior Coaching

Stratasys continues superior coaching programs this week at its North American subsidiary headquarters in Minnesota. From Could 21-23, “Stereolithography Superior Operations” might be supplied to clients on the lookout for deeper data of the corporate’s complete SLA workflow on the Stratasys Neo 3D printer household.

“Learners might be launched to matters corresponding to supplies consideration, working in Materialise Magics software program, printing operations, finest practices and components ending methods.”

For extra particulars and registration, electronic mail

Could 21: TriMech on Enhancing Healthcare with AM

When you’ve ever puzzled how AM is used within the medical discipline, then you definately’ll wish to tune in to TriMech’s webinar on “Enhancing Healthcare with Additive Manufacturing” at 10 am EST on Tuesday, Could twenty first. Attendees will obtain a high-level overview of various Stratasys gear—together with SLA with the NEO platform, P3 with the Origin One platform, biocompatible supplies with FDM, SAF with PA11 and PA12 for surgical guides, and extra—and the way it’s used within the medical trade. Varied use instances might be highlighted for every know-how.

“Be a part of us as TriMech’s Caleb Overcash and Stratasys’s Maddy Duensing and Evan Hochstein will go over every know-how and their totally different use instances highlighted, together with their corresponding biocompatible supplies. Plus, discover out what our engineer’s favourite additive medical materials is!”

You may register for the webinar right here.

Could 21: B9 Elite Micro 3D Printer

This Tuesday, Could twenty first, B9Creations is holding a webinar unveiling its latest 3D printer. To “Uncover the Subsequent-Gen B9 Elite Micro 3D Printer,” tune in at 11 am EST, and study all about its ultra-micro printing decision capabilities, excessive accuracy and repeatability, and extra. A number of members of the B9Creations crew will current an in-depth exploration of the B9 Elite Micro workflow, together with its new micro-specific CAM software program capabilities. Attendees may even obtain an summary of the brand new high-performing Elite Micro Supplies, complete evaluation of the patented know-how powering the 3D ecosystem, how clients are at present utilizing the B9 Elite Micro, and extra. There may even be a dwell Q&A session.

“Now able to printing right down to an astonishing 10 microns, this cutting-edge know-how delivers enhanced decision for self-supporting overhangs, thinner vertical wall thicknesses, and finer channel diameters – all with tolerances that surpass precision manufacturing.”

You may register for the webinar right here.

Could 21: Past the Forge with HP

Additionally at 11 am EST on the twenty first, HP will maintain the second session in its “Past the Forge: A Metals 3D Printing Sequence.” The primary one was about Metallic Jet know-how, and this session will deal with the “Advantages of 3D Printing vs Conventional Strategies.” The audio system might be Brett Harris, Sr. World Product Supervisor, HP Inc., and Zachary Lovato, HP 3D Print, Americas Advertising, HP Inc.

“On this subsequent session, hear from the HP Consultants on what advantages 3D printing has over conventional strategies and when it is smart to decide on one over the opposite.”

You may register for the webinar right here.

Could 21: AM for Plane Cockpit Interiors

3D Techniques can be holding a webinar on Tuesday the twenty first, all about “AM for Plane Cockpit Inside Elements,” at 3 pm EST. Sponsored by GIE Media’s Aerospace Manufacturing & Design, it can function collaborators from 3D Techniques and the College of Dayton Analysis Institute (UDRI), who will introduce a brand new powerful, flame-retardant photopolymer for AM. This materials was developed and examined in accordance with FAR 25.853 and extra necessities for cockpit elements. Attendees will study concerning the materials’s environmental/efficiency take a look at outcomes, and its mechanical properties, which allow qualification and use for aerospace functions.

“The aerospace group has a necessity for substitute components for ageing plane, nonetheless unique manufacturing pathways not exist or are costly with lengthy lead instances. Additive Manufacturing (AM) now has the potential to deal with present provide challenges for cockpit inside elements.”

You may register for the webinar right here.

Could 21: Core Additive Injects New Life into Manufacturing

The final occasion on the twenty first will happen in Australia, as Core Additive and NDC Plastic Moulding supply “Injecting New Life into Manufacturing,” that includes Markforged, from 4-7 pm AEST. NDC Plastic Moulding is Core Additive’s new Additive Manufacturing Centre of Excellence in Queensland, and attendees will get pleasure from welcome drinks earlier than a collection of brief displays, corresponding to “How Additive Manufacturing is Remodeling the Meals & Beverage Business.” There may even be a Markforged 3D printer viewing and Q&A session.

“The demand for Australia 3D Printing market is anticipated to achieve US$ 164 million by 2030, accelerating with an annual progress charge of 8.7% (sourced by Yahoo finance).

“The demand for such providers within the trade has reached unprecedented heights, and by integrating Additive Manufacturing, NDC Plastic Moulding is happy to supply native firms a complete suite of providers coupled with in depth experience, all underneath one roof.”

You may register for the occasion right here.

Could 22: Massivit’s Maryland Open Home

When you occur to be on the East Coast this week, be a part of Massivit North America for its closing Open Home occasion of the spring, at occasion administration firm Hatch Displays in Elkridge, Maryland on Wednesday, Could twenty second. The crew will showcase the industrial-grade Massivit 5000 for ultra-fast customized design and printing capabilities for props, shows, and signage, in addition to the Massivit 10000-G, designed for high-speed, direct printing of instruments, molds, mandrels, jigs and fixtures, and plugs for composite supplies manufacturing. Hatch Displays, a Massivit buyer, may even clarify how the know-how has boosted its enterprise.

“Be a part of us for this inspiring occasion at Hatch Displays the place you’ll have the chance to witness dwell demos of our high-speed, big 3D printers in motion. Drinks and lunch are supplied!”

You may register for the open home right here.

Could 22: Expertise Stratasys Tour Begins

The Expertise Stratasys Tour throughout the US is ramping up once more, and this week the truck stops in San Diego, California on the twenty second. It is a handy method to see the corporate’s know-how for your self, as every cease is hosted by a neighborhood 3D printing crew that may reply your questions and stroll you thru the assorted printers and functions—this cease might be hosted by Purple Platypus. There might be shows showcasing a wide-ranging number of supplies, in addition to loads of instance components from many various industries and applied sciences.

“Be a part of us at certainly one of our tour stops throughout the US to see the most recent in Stratasys 3D printers, supplies, software program and additive options, together with Stratasys printers – the H350™, F370CR, J55™, Origin® One, Neo®800 and the brand new F3300™.”

You may register for this tour cease right here.

Could 23: ADDITIV Design World

The primary-ever version of ADDITIV Design World by 3Dnatives will happen this Thursday, Could twenty third, from 9 am till 1 pm EST. This free worldwide, digital occasion is devoted to the most recent developments in design for additive manufacturing (DfAM) and can function three workshops and three panel discussions. Plus, is a proud sponsor for this occasion; different sponsors and companions embrace SPE, VoxelMatters, IAM3DHUB, and the Additive Producer Inexperienced Commerce Affiliation (AMGTA).

The aim? Half a day devoted to conferences, workshops, and networking that may deliver collectively the primary gamers in additive manufacturing and software program. Come to study extra about half design and developments for the long run!”

You may register for the occasion right here.

Could 23: 3DHEALS on 3D Microfabrication 2.0

The most recent digital panel dialogue by 3DHEALS might be about 3D Microfabrication 2.0, at 11 am EST on the twenty third. Moderated by neuroradiologist Dr. Jenny Chen, the founder and CEO of 3DHEALS, the dialogue by a few of the discipline’s high consultants and pioneers will showcase the thrilling potential of 3D microfabrication methods in revolutionizing medical machine manufacturing, together with microneedles, microfluidic units, and robotic and endoscopic ideas.

“From intricate implants to specialised devices, individuals will achieve unique insights into how micro or nano-scale 3D printing is reshaping the design, manufacturing, and performance of medical units with unprecedented precision and effectivity at a micro-scale utilizing quite a lot of biomaterials.”

You may register for the occasion right here.

Could 25: Makelab’s San Francisco Launch Social gathering

Lastly, on Saturday night time, Could twenty fifth, 3D printing service bureau Makelab is having an epic launch celebration for its new location in San Francisco! The Makelab San Francisco x Studio 55 Launch might be from 6:30-9:30 pm PDT on Grace Avenue in San Francisco, the place NYC-based Makelab will share house with Studio 55, a inventive haven of {hardware} innovation and Studio 45’s latest sister location. The ability supplies an everyday workspace for each groups, and people who attend the celebration can tour each, plus get pleasure from meals, drinks, and the attractive rooftop deck.

“From the underside of our hearts, thanks for the assist and excellence you’ve all the time demanded from us, making us higher,” stated Christina Perla, Makelab’s Co-Founder and CEO. “Increasing Makelab from New York to San Francisco is a testomony to your belief and enthusiasm. We’re excited to deliver our providers to the West Coast and proceed this journey collectively!”

You may register for the celebration right here.

Do you’ve gotten information to share about any future webinars or digital and dwell occasions? Please tell us!



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments