Thursday, June 13, 2024
Home3D PrintingSUNLU Filament Dryer S2 Assessment: Guide, Temperature, Assessments

SUNLU Filament Dryer S2 Assessment: Guide, Temperature, Assessments


The standard of 3D prints typically drops when chilly and moist climate arrives. Excessive humidity within the air, rain, snow, and storms finally negatively have an effect on your 3D printing supplies. For instance, some filaments take in moisture, leading to failed prints, and that’s when a very good filament dryer turns out to be useful. Let’s unbox and evaluation the brand new SUNLU filament dryer, Filadryer S2, to see how this small system can dry PLA, ABS, PETG, and different plastics and enable you 3D print excellent fashions.

How a lot moisture can your filament take in? All the things relies on its hygroscopicity attribute. Hygroscopicity is the supplies’ property to soak up moisture from the encircling setting. Some merchandise, similar to SBS, don’t require the utilization of filament dryers as a result of they don’t take in any moisture. However others, similar to ABS, PETG, and PLA, take in it too effectively.

SUNLU filament dryer

SUNLU Filament Dryer

The brand new 3D printer filament dryer by SUNLU arrives in a small, neat field. You could find the SUNLU S2 filament drybox, a 48-watt energy provide (fairly highly effective for such a tool), and directions inside.

SUNLU S2

The filament drybox look may not enchantment to everybody’s style as a result of Filadryer S2 is a straightforward cylinder with legs. Some opponents provide extra attention-grabbing filament dryer designs; nevertheless, SUNLU S2 is praised by many purchasers for its unbelievable efficiency and performance, which is much extra essential than the appears.

Learn additionally: Finest Tips about Tips on how to Retailer 3D Printer Filament

SUNLU S2 Assessment

You possibly can activate Filadryer S2 by double-tapping on its display, which is extremely massive, shiny, and touch-sensitive. You possibly can simply learn what it exhibits from roughly 9.8 toes (3 meters).

Filadryer S2

You possibly can configure your SUNLU filament dryer on its touchscreen. There aren’t any submenus. The show is 3.42 x 2.87 inches (8.7 x 7.3 cm) and really informative (the perfect one we noticed in 3D printer filament dryer containers). It enables you to modify humidity and filament dryer temperature and set the timer and goal temperature.

You possibly can activate and off the ring mild added for magnificence. It comes with two glow modes: flashing and spinning.

This filament dryer field has a timer. When time is gone, the heating stops. Nonetheless, the SUNLU dryer has a bonus. You possibly can set the timer to infinite mode and cease worrying concerning the SUNLU S2 filament dryer turning off as you 3D print. It’s a handy function to set exact parameters for every 3D printing materials sort. You configure it as soon as, and the temperatures are right even whenever you change the filament.

Cain 3D Printing Model printed with filament dried in SUNLU filament dryer box
Cain 3D Printing Mannequin printed with filament dried in SUNLU filament dryer field

Filament Dryer Temperature

SUNLU S2 permits customers to change between ℃ and ℉ on the touchscreen. You could find filament dryer temperature settings for ABS, PETG, PLA, and different sorts of plastic. Such suggestions simplify the setup and assist you choose the suitable temperature for drying PLA, ABS, and PETG on the go.

In response to the producer, the brand new SUNLU filament dryer field helps temperatures from 113 to 158 ℉ (45 to 70 ℃). It sounds mighty, and Gambody will take a look at the S2 energy. The introduced temperature vary makes it doable to dry each commonplace plastics and refractory sorts similar to polyamide.

SUNLU filament dryer manual
Uncover extra 3D printing fashions on Gambody to check your 3D printer filament dryer field

Learn additionally: Finest 3D Printing String Repair Options

SUNLU Dryer Modifications

In case you watch the YouTube SUNLU Filadryer S2 evaluation selection, you’ll hear both reward or criticism due to the shortage of a fan to combine the air lots contained in the filament drying field. On the one hand, no fan helps the SUNLU dryer to function silently. However, it limits its performance in comparison with opponents.

In our SUNLU S2 evaluation, we will solely notice that the filament dryer obtained by Gambody has a fan inside. We first heard the cooler’s noise once we turned on this system. The corporate’s engineers take into account buyer evaluations and add product modifications to fulfill customers.

SUNLU S2 filament dryer

Upon nearer inspection of the SUNLU S2 filament dryer design, we will verify that this Filadryer S2 has a fan! It is perhaps this system’s second revision, making it much less silent however extra purposeful. The fan helps combine the nice and cozy air contained in the drying field. If the noise bothers you, flip off the fan manually, however keep in mind to insulate the wires.

Tips on how to Use SUNLU Filament Dryer

This cool filament dryer field has a easy design. The heater on the steel sheet on the high and backside helps disperse warmth contained in the chamber. Every sheet is screwed with 4 screws.

SUNLU Filadryer S2

The reel spins on iron rollers with bearings, which rotate simply and will be eliminated for upkeep.

3D printer filament dryer iron rollers

Comply with our easy information on the right way to use SUNLU filament dryer:

Step 1. Open the lid and insert the filament spoon.

Step 2. Flip in your Filadryer S2 by double-tapping on its display.

Step 3. Begin 3D printing utilizing your 3D printer. The S2 filament heater has a feed-out coil. Thus, you possibly can hold drying PLA or different plastics whereas feeding it to your 3D printer.

Sephiroth 3D Print made with filament dried in SUNLU Filadryer
Sephiroth 3D Print made with filament dried in SUNLU Filadryer

Learn additionally: Over 100 Enjoyable 3D Printer Initiatives

3D Printer Filament Drying Assessments

After operating a number of assessments, Gambody can verify the next:

  • Filadryer S2 by SUNLU can warmth as much as 161 ℉ (72 ℃). The power to protect this temperature contained in the filament dryer field makes S2 stand out amongst its opponents.
  • In case you flip off the timer function, you possibly can constantly dry the 3D printing supplies as you 3D print utilizing your printer.
  • The SUNLU S2 filament dryer fan is fairly quiet. It’s undoubtedly quieter than the coolers used on a 3D printer head.
Alien Xenomorph in Diorama printed with filament dried in S2 3D printer dry box
Alien Xenomorph in Diorama printed with filament dried in S2 3D printer dry field

Gambody examined drying PLA and PETG utilizing Filadryer S2. However this system may dry ABS with out points and helps elastane that requires the temperature from 149 to 158 ℉ (65 to 70 ℃) and even as much as 161 ℉ (72 ℃).

The brand new SUNLU filament dryer has extra professionals than cons. Amongst its disadvantages, we will notice a single gap for filament on the backside. Customers who place their filament dryer field on high of a 3D printer may want a plug for this gap. In addition to, you possibly can solely put one filament spool inside this 3D printer filament dryer field. It could be fantastic if the chamber might maintain two 2.2-lbs (1-kg) spools.

The Filadryer S2 field’s darkish clear plastic can be a drawback. It makes it tough to see the quantity of filament remaining on the spool from afar. It’s a must to verify it by coming nearer and opening the lid.

SUNLU dryer

P.S. In case you add the SUNLU S2 filament dryer to your FLSUN 3D printer and FLSUN V400 3D Printer Enclosure, you’ll love how unbelievable each gadgets look collectively. You possibly can inform that the identical designer labored on them. Wow!

Conclusion

This SUNLU filament dryer has many extra professionals than cons and can discover its purchaser. Gambody believes each 3D printing fanatic ought to have a 3D printer filament dryer field of their arsenal, particularly on wet and humid days. The SUNLU S2 absolutely complies with its promised traits. It performs effectively in drying PLA, ABS, PETG, and different filaments, whereas its cute ring mild makes the method extra satisfying.

(Visited 1,189 occasions, 1 visits at present)

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments